MPA BA Lite Rifle

$2,999.00

 

 

 

Clear
SKU: MPA BA Lite Rifle Category: Tags: , ,

Description

MPA BA Lite Rifle

  • Caliber – 6mm, 243, 6.5, 270, 7mm, 280 AI, 308, 300WM, 300 Ultra, 338 WM, 338 Lapua and Others
  • Custom Throated to your Handloads or Match Grade Chamer – your choice
  • Action – Kelblys Atlas Tactical
  • Barrel – Spencer/MPA Hand Lapped Barrel
  • Action/Bolt Design – Remington 700 Type
  • Chassis – MPA BA Lite Chassis
  • Threaded Barrel with Thread Protector (Suppressor or Muzzle Brake Ready)
  • Trigger Tech (1-3 Set to your Preference)
  • Magazine – AICS (5 Round Accurate/AICS Type Magazine Included)
  • Built In Bubble Level
  • Thumb Notch
  • Spigot Mount Ready
  • Chassis Weight is 2.9 lbs. Overall rifle Weight depends on Barrel length and Contour

Action

  • Kelblys Atlas Tactical – Black Nitrided
  • All Critical Features are machined after heat treat (Hard Machining)
  • Recoil Lugs Ground to .0001″ Flatness and Parallelism

Bolt

  • One Piece Design of the Bolt, Lugs and Handle
  • CNC OD Ground on All critical features and dimensions
  • Spiral Fluting on all Bolts
  • All Bolts are Hand Lapped and Fitted to each individual action
  • Black Nitride

Barrel

  • Spencer/MPA Rifle Barrel
  • 416RQ Stainless Steel
  • Precision Gun Drilled, Reamed and Honed
  • Pull Button Rifled
  • Stress Relieved
  • Hand Lapped
  • Bore and Land Inspected on Video Borescope
  • Sheffield Air Gage Inspection to .0001″ on Bore and Rifle Land Variation
  • Chamber is indicated within .0001″ or less – to the bore of the rifle

Chassis

  • Masterpiece Arms Light Weight BA Chassis
  • Produced from 6061 Aluminum
  • V-Bedding System with Additional clearance for Glass Bedding Action and Straight Section of Barrel
  • MPA Buttstock with Adjustable Cheek Riser, Length of Pull
  • Lower mounted Picatinny Rail
  • 20 MOA Scope Rail
  • Cerakote Finish – Multiple Colors Available
  • Spigot Mount Ready
  • Built In Bubble Level
  • Thumb Notch

Trigger

  • Trigger Tech (Set to 1-3 lbs)

Accuracy Guarantee

  • 1/2″ MOA

Rifle Case

  • Plano Basic Rifle Case

Specs

  • Chassis Weight – 2.9 lbs
  • Rifle Weight – Depends on Barrel Length and Contour
  • Barrel Twist – Caliber Specific
  • Barrel Length – 20-27″ (Customer Choice)
  • Barrel Muzzle Thread – 5/8-24 TPI
  • Barrel Profile – Customer Choice
  • Coating – Cerakote
  • Length of Pull – 13.75-15″
  • Trigger – Rifle Basix Lv1 or L1.
  • Trigger Pull – 0.5-4 lbs. (Customer Choice)

Please allow 6-10 weeks for delivery from date of order.

Custom Cerakote Colors add $135 for the chassis body and $65 for the barreled action. Check with MPA for all the custom colors available.

The overall premise of this rifle is a custom built, application specific rifle. Due to the significantly reduced weight of the chassis, and the accuracy capabilities, this rifle has tremendous long range hunting capabilities. The customer chooses his caliber and chamber, along with the length and contour of the barrel. These choices will be determined by the application for the rifle.

If you plan on packing the rifle for extended ranges on foot, then a lighter contour would be appropriate. However, if plans include using a muzzle brake or suppressor, the muzzle diameter needs to be large enough to provide a shoulder for the “end of barrel” device to attach and locate.

If you are focused more on velocity and extended thermal stability of the barrel, then a longer, heavier contour may be appropriate.

Refer to the contour chart on the “Precision Rifle Barrels” page on our website.

All chassis and barrels are cerakoted, and we provide a multitude of colors and patterns. Solid colors are included. Custom patterns have a +$150 upcharge.

The length of pull and cheek riser position are adjustable and locked in position with a series of set screws that are embedded into the buttstock body. This is the same system we use on our standard BA chassis, but without the thumb wheels.

The adjustable monopod can be added to this chassis, along with the bag rider plate.

Trigger type and pull are also important considerations. We offer either the Rifle Basix L1 (1.5-4lbs) and the LV1 (8 oz to 2 lbs) as our standard triggers. Just pick the trigger pull you want. We also can provide the rifle with other aftermarket triggers. Timney, Jewel, Huber and others. Just let us know if you have a preference other than Rifle Basix. Triggers other than our standard will include an upcharge depending on the trigger.

On caliber selection, if your choice is not shown above, contact MPA. If a chamber reamer is available, we can create the rifle. Twist rates depend on the caliber and projectile weight.

The spigot mount is an accessory mentioned above is designed to be inserted in the front of the chassis to provide an extended distance between the front bipod and the rear support. Simply insert the spigot into the chassis and attach with (2) Flat Head Cap Screws. Then move the pic rail to the spigot.

For those who would prefer a sling stud instead of the picatinny rail, just let us know.

At the time of order, please choose your caliber, barrel length, contour, trigger type/pull weight and color.

Bipod is not included.

 

 

Share this post...Share on FacebookTweet about this on TwitterShare on Google+Share on LinkedInPin on PinterestShare on StumbleUponShare on TumblrShare on RedditEmail this to someone

Additional information

Color

, , , , , , ,

Left Hand / Right Hand

Left Handed, Right Handed